Welcome to Your Next Step on Your Journey to Better Sleep
Your step-by-step guide to your home sleep kit
Home sleep study kits allow you to safely and accurately test your sleep apnea, eliminating the need to travel and sleep in an uncomfortable sleep center. After your initial consultation with one of our sleep providers, we will send a home sleep study kit directly to you. After receiving your home sleep test device, please follow these instructions to ensure you’re getting the most accurate results from your home sleep study kit. When your assigned sleep specialist receives your results, they will be in touch with you to discuss the next steps in your treatment.
Upon Receiving Your Test Kit
1. Please open your test kit and review its contents. Should any items be missing please contact us immediately.
a. Testing Device With Belt
The black box is the data storage for the entire test. It also monitors the fluctuation of your chest while you breathe.
b. Nasal Cannula
The plastic tubing is attached to the testing device. It is used to monitor your breathing during the study.
c. Pulse Oximeter
This is worn on the finger and is used to monitor your heart rate and the amount of oxygen in your blood.
2. Please review the following instructions on assembly and use of the device. Please do not actually put the device on until you are ready to go to sleep. Remember, the test device should be used the night that you receive it, and returned the following day.
Putting on the Home Apnea Test
1. Fitting the Belt
Wrap the belt tightly around your chest with the test box in front. The belt should bestrapped onto your body over your breasts in the center of your chest and should be very snug. You should not be uncomfortable, but belt needs to be secure.
2. Placing the nasal cannula
Insert the prongs into the nostrils. Be sure to have the curved tube pointing towards the back of the nose. Loop the tubing around the ears. Pull the slider up towards the chin until the plastic tubing is secure and comfortable.
3. Put pulse oximeter around finger
Slip the opening of the oximeter over your pointer finger of either hand.
Starting The Test
1. Press down and hold the power button in the center of the device for about 3 seconds. The light will turn on.
2. Check the “pulse on” monitor on your finger which should be lit up as well. If so, you are all set to go to sleep.
* If the lights are not on, check and make sure the batteries are in correctly and press the button again.
Ending the Test
1. After you wake up before you leave the bed, press and hold the power button down for another 3 seconds. The test complete light should turn green or red. Then hold it down for another 3 seconds and the device will shut off.
2. Now you can place the machine and all its accessories into the return bag provided to you.
3. Complete the post sleep questionnaire and place in bag with the testing device.
4. Return the test kit to us in the mailer provided to you.
You will get the most accurate results from your home sleep test device by following the instructions provided. Please return the test kit to us in the mailer provided to you. Ognomy will cover your shipping cost. After we receive your home sleep study kit results, your assigned sleep provider will carefully review your results.
Home Apnea Test Frequently Asked Questions
Q. Does the nasal cannula blow air?
A. No. The cannula is used to detect your breathing, no air or anything else comes out of the machine.
Q. What if I need to use the bathroom in the middle of the night?
A. If you have to use the bathroom during the test, simply remove the pulse ox from your finger, go to the bathroom then replace the pulse ox afterwards and go back to sleep. Do not press any buttons in the middle of the night.
Q.Can I drink alcohol the night of the study:
A. Do not consume alcohol, caffeine or any drugs the day leading up to and the night of the study, as it will severely affect the result.
Q. Are home studies as accurate and reliable as the in-lab studies?
A. Home apnea testing is approved for use by the American Academy of Sleep Medicine to test for apnea in many patient populations. Home apnea tests can underestimate the severity of sleep apnea, so in-lab testing might be required in certain patients.
Q. What if one of the accessories falls off during the night?
A. Simply place it back into the correct spot and go back to sleep.
Q. How many hours should I wear the test for?
A. For best results, the test should be used for at least 6 hours a night.
Q. Will the belt fit my XL/XS body size?
A. The belts are very flexible and can fit most body types.
Q. Is at home sleep study covered by insurance?
A. Ognomy is covered by most major insurances, including Medicare, in most regions. If not covered by your insurance or if you have a high-deductible plan or no health insurance at present, Ognomy offers the most reasonable self-pay options for you.
After scheduling your first appointment with one of our sleep specialists, the Ognomy customer service team will reach out to you to see if you can have your at home sleep study covered by insurance. Prior to your appointment, you are not obligated to pay any costs. You can always cancel 24 hours in advance of your video appointment with no penalty.
Q. Is the home sleep study kit accurate?
A. Yes! Ognomy sends you a scientifically proven FDA approved home sleep test device. A board certified specialist will review your results. The Ognomy home sleep study kit is FDA approved, highly effective, and is shipped directly to your home. The test will monitor your oxygen and breathing levels and even your pulse rate. Ognomy also provides full instructions to enable you to self administer the test, so you never have to travel to, or stay overnight, at a sleep center.